Where can I get a graticle installed in FUJI binoculars?

Other provisions not covered above that may make survival easier if your life is tossed out of the norm. This section is for discussing everything from arc welders to underwear.

Moderator: ZS Global Moderators

Post Reply
solidstate
ZS Member
ZS Member
Posts: 16
Joined: Sat Apr 19, 2008 9:46 pm
Location: NM, USA

Where can I get a graticle installed in FUJI binoculars?

Post by solidstate » Sat Apr 06, 2019 7:55 pm

I would like to get a graticle installed in my FUJI binoculars. I would prefer mil dimensions.
Does anyone know anyplace that can do this?

I used the graticle in my Steiner 8x30 binoculars often for rangefinding and determining sizes.

Thanks.

User avatar
Dabster
* * *
Posts: 751
Joined: Mon Feb 21, 2011 12:20 am

Re: Where can I get a graticle installed in FUJI binoculars?

Post by Dabster » Wed Apr 10, 2019 11:28 am

Great question. Personally I would be reluctant to let a third party open mine up to add a reticle.

Why do so few binocular companies have a mildot range finding system? A small one in the corner would not be intrusive.
Shiney side out... Shiney side out...

User avatar
raptor
ZS Global Moderator
ZS Global Moderator
Posts: 16554
Joined: Sun Mar 04, 2007 10:18 pm
Location: Greater New Orleans Area

Re: Where can I get a graticle installed in FUJI binoculars?

Post by raptor » Wed Apr 10, 2019 3:44 pm

Check with the factory but I suspect that it is not a retrofit item.

You can call this shop and ask them.
https://www.bakermarineusa.com

solidstate
ZS Member
ZS Member
Posts: 16
Joined: Sat Apr 19, 2008 9:46 pm
Location: NM, USA

Re: Where can I get a graticle installed in FUJI binoculars?

Post by solidstate » Sat Apr 13, 2019 4:50 pm

raptor wrote:
Wed Apr 10, 2019 3:44 pm
Check with the factory but I suspect that it is not a retrofit item.

You can call this shop and ask them.
https://www.bakermarineusa.com
Thanks for the reply!
I already checked with the factory. They "do not offer this service". (So very Japanese).

I will contact Baker Marine and post their reply.

Thanks again!

Post Reply

Return to “Other Gear”