A couple more blades that have recently left my shop.
The first is a camp chopper traded to another knifemaker for a kitchen knife for my wife. It's taken a loooong time for me to finish it up. It has a 13" blade forged from 80CrV2 steel, with a tan over black paracord wrap and tan Kydex sheath.
joec01 by James Helm, on Flickr
The second is a re-wrap on a CRKT Hisshou, designed by James Williams. I usually don't work on other people's blades, but this is the design that started me playing around with tanto designs of my own. The customer had already stripped off the handle wrap and ray skin underlay, leaving the polymer bolster in place. I laid down a neoprene foundation, followed by a tan paracord underlay and tang paracord overlay, with a three-strand Turk's head knot on top of the bolster.
hisshourewrap01 by James Helm, on Flickr
The sheath on this is Boltaron, very similar to Kydex but less susceptible to temperature changes once molded. I think it has some better definition as well. The pistol holster guys like it. This is what I'll be using on sheaths now.
hisshourewrap02 by James Helm, on Flickr
The Hisshou is zero ground, something I've never done, but I touched it up with my stropping belt on my belt grinder with some green chrome compound. He noticed, sayin, "It's friggin' shaving sharp!"
For those who live in areas where firearms are not an option and those that are smart enough to have a back up.
Moderator: ZS Global Moderators
1 post • Page 1 of 1
- * * * * *
- Posts: 1970
- Joined: Mon Mar 23, 2009 12:09 am
- Favorite Zombie Movies: Night of the Living Dead, Dawn of the Dead re-make
- Location: San Antonio, Texas