Meat cleaver, bush dha, and Persian fighter

For those who live in areas where firearms are not an option and those that are smart enough to have a back up.

Moderator: ZS Global Moderators

Post Reply
Storm Crow
* * * * *
Posts: 1956
Joined: Mon Mar 23, 2009 12:09 am
Favorite Zombie Movies: Night of the Living Dead, Dawn of the Dead re-make
Location: San Antonio, Texas

Meat cleaver, bush dha, and Persian fighter

Post by Storm Crow » Wed Oct 25, 2017 9:41 pm

Some mid-sized blades finished up a while back. All are 80CrV2 steel.

First up is a small meat cleaver commissioned by a customer. He liked the looks of a cord-wrapped cleaver I had forged for the Blade Show and wanted one with a TeroTuf handle. I liked the results well enough I traced it out to have a reference if I do future versions. :) It's about a 7" blade.

Imagecleaver01 by James Helm, on Flickr

Imagecleaver02 by James Helm, on Flickr

It was picked up at the Usual Suspects Network Gathering knife show, and I didn't get a chance to get good pics before traveling, but here are a couple of interesting shots of it. The first is during thermal cycling, after forging and before stock removal.

Imagecleaver03 by James Helm, on Flickr

And a picture from the customer himself, just prior to cutting up these ribs. According to him, the cleaver "went through them like they weren't there". :D

Imageribs by James Helm, on Flickr

And speaking of cutting up critter parts, another customer had this pic of his drop point processing out rabbit along with an ESEE.

Imagerabbit by James Helm, on Flickr

This bush dha was another casualty of having to get everything ready for the show. These are the only pictures I managed to get. It was originally intended to be a different blade shape, more of a bolo, but sometimes you have to work with the steel rather than boss it around. It's about a 12" blade with a handle of hemp under paracord.

Imagedha02 by James Helm, on Flickr

I did get an awesome shot of it with the infamous Ed Calderon, the Taco Ninja. Got an interesting upcoming project with Ed.

Imagedha01 by James Helm, on Flickr

And this 12"-bladed Persian fighter was originally planned to be on my table at the Blade Show, but ended up missing out because I was running out of time. It went to the Gathering with me and came back where it was claimed once I posted it on Instagram. The blade is about 12", and the top edge is unsharpened. I'd consider this to be about as close to doing a fantasy piece as I do.

Imagepersian01 by James Helm, on Flickr

Imagepersian02 by James Helm, on Flickr

The customer requested a mild steel trainer to be predominantly used on his BOB training dummy. That was a first to me, but I agreed. I used 3/16" mild steel and trimmed out the shape on a bandsaw before cleaning up on my belt grinder. The handles of both
are hemp under paracord, and it took three tries to get the wrap to feel almost the same as the original. Then I worked on getting the balance the same as the original.

Imagepersian02 by James Helm, on Flickr

The result was a trainer that's a bit lighter than the original, but due to having the same balance it feels very close to the same.

Imagepersian01 by James Helm, on Flickr

Imagepersian03 by James Helm, on Flickr
Proud to be a Neo-Tribal Metalsmith scavenging the wreckage of civilization.

Forged blades: http://www.helmforge.com

Stock removal blades: http://www.helmgrind.com

The Wasteland Crow Project: http://wastelandcrow.blogspot.com

Image

User avatar
Halfapint
* * * * *
Posts: 3654
Joined: Sat Nov 03, 2012 5:41 pm
Favorite Zombie Movies: all?
Location: Central Cascadia

Re: Meat cleaver, bush dha, and Persian fighter

Post by Halfapint » Wed Oct 25, 2017 9:53 pm

Awesome man! Great pictures as always! As news, my car was broken into and the only things they took were a wool blanket, and the tomahawk I bought from you! :(

Curious what your wait times are for blades nowadays?
JeeperCreeper wrote:I like huge dicks, Halfapint, so you are OK in my book.... hahaha
Spazzy wrote:Tell ya what... If Zombies attack and the world ends I'll hook tandem toddlers to a plow if it means I'll be able to eat...

User avatar
majorhavoc
ZS Donor
ZS Donor
Posts: 6801
Joined: Wed May 12, 2010 10:06 am
Favorite Zombie Movies: 28 Days Later, ZombieLand, Dawn of the Dead
Location: Maine

Re: Meat cleaver, bush dha, and Persian fighter

Post by majorhavoc » Wed Oct 25, 2017 9:59 pm

Just love, love, love the mottled, rough hewn look of your blades. Bravo!

Storm Crow
* * * * *
Posts: 1956
Joined: Mon Mar 23, 2009 12:09 am
Favorite Zombie Movies: Night of the Living Dead, Dawn of the Dead re-make
Location: San Antonio, Texas

Re: Meat cleaver, bush dha, and Persian fighter

Post by Storm Crow » Wed Oct 25, 2017 10:09 pm

Halfapint - That really sucks! :evil:

I've been on hiatus from taking new forged orders for a while, though I'm trying to post at least one blade per month that isn't slated for anyone on my Instagram and Facebook accounts as a first come, first served deal.

Tomahawks should be quicker, though I'm at the tail end of a long, slow upgrade of my handle and sheath jig tooling.
Proud to be a Neo-Tribal Metalsmith scavenging the wreckage of civilization.

Forged blades: http://www.helmforge.com

Stock removal blades: http://www.helmgrind.com

The Wasteland Crow Project: http://wastelandcrow.blogspot.com

Image

Post Reply

Return to “Other Weapons”