Zombie Squad
https://www.zombiehunters.org/forum/

Hand Made Mini Machete
https://www.zombiehunters.org/forum/viewtopic.php?f=33&t=119564
Page 1 of 1

Author:  Fordas [ Mon Feb 06, 2017 2:41 pm ]
Post subject:  Hand Made Mini Machete

the ban on zombie knives has simply made us brits more versatile :P

Author:  12_Gauge_Chimp [ Mon Feb 06, 2017 4:20 pm ]
Post subject:  Re: Hand Made Mini Machete

Nice machete, but one thing concerns me and that's the heat treatment.

Using a stove or torch might work, but in the long run you'd probably be better off making a proper heat treatment set up.

I think Storm Crow posted a video here a long time ago on how to make a cheap home heat treatment rig, but I could be wrong. Either way, there's bound to be tons of videos on YouTube about that.

Also, invest in a bench grinder. It's probably a lot easier on you to use one of those rather than a hand held grinder. One wrong move with the hand held grinder and you could end up with a major injury to your hands.

Those comments aside, you're doing a good job with your videos. The volume of your music choices no longer covers up anything else in the video and we can actually hear you when you speak.

Author:  The Twizzler [ Mon Feb 06, 2017 11:32 pm ]
Post subject:  Re: Hand Made Mini Machete

One idea might be to find an old fashioned bellows and drill a hole towards the bottom side of that stove and use that to get the heat up. Still it's pretty amazing what you did. Good Job :clap:

Author:  Fordas [ Tue Feb 14, 2017 5:01 am ]
Post subject:  Re: Hand Made Mini Machete

The Twizzler wrote:
One idea might be to find an old fashioned bellows and drill a hole towards the bottom side of that stove and use that to get the heat up. Still it's pretty amazing what you did. Good Job :clap:


one thing you don't see in this video but you do in my most recent is that i used my heat gun as a method of forcing air through the fire :D

Author:  Storm Crow [ Thu Feb 16, 2017 10:45 pm ]
Post subject:  Re: Hand Made Mini Machete

I skimmed the video, so I may have missed it. Is there mention of the alloy used?

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/