Pay it Forward - Firearm parts and accessories

[nimdabew]

Hey y'all. This is a thread is here for people to pass on unwanted firearm parts, accessories, or firearm related crap you just don't feel like looking at anymore. Post what you want/need and then post something that you have that you would like to give to someone else it. I will go first since I have crap that I want and crap I wouldn't mind parting ways with.

Dave, sticky???

Have:

Cut-down carry handle, mil-spec height. Unfinished, but the hard part is done. Looks like a LMT rear, but was cut down using a dremel. I never use it anymore.

Want:

USGI sling with metal clip for the FSB sling swivel.

ETA:

I have updated how this thread is supposed to work.

First, do not post something unless you are willing to give something away for free. Shipping will be paid by the person that wants the item! Work this out amongst yourselves.

Second, do not say you will be willing to take something unless you put something else up in the thread. This prevents moochers and people taking things without contributing something to the community. People with things that they are willing to part with, make sure they put something in the thread before you send them something. Try to aim for at least a $25 value or items that cannot be purchased by themselves (like Magpul PMAG covers).

Third, trading is fine, but don't expect it for each item you give out. If you post something, just keep an eye out in the thread and try to snag stuff when it becomes available. I have sent things out to people with nothing in return because I don't need it, but the next person might. Try to emulate this.

Lastly, all items will be sent as is, with no express warranty or refunds or whatever. If an item is malfunctioning, say so. If it is not, then assume that it is in working order.

Thanks for helping maintain the community of sharing!

[Braxton]

I have a Magpul AFG that I cant stand. Who wants to trade me something for it?


Spoken for.

[nimdabew]

I have a Magpul AFG that I cant stand. Who wants to trade me something for it?

This is not how it works... You post what you need, and what you have. if someone needs it, you send it to them. Eventually, someone will (hopefully) send you what you want/need. Try to keep your posts updated too so you don't keep getting PM's for stuff you already have.

[Big B]

I have a 10 round 7.62x39 AK mag someone can have.

It came with one of my rifles and I'm tired of it sitting there collecting dust.

ETA: Chase The Hero called dibs

[Unassigned]

EDIT #1: PM'd Braxton about the AFG before posting this.
EDIT #2: Quad Rail spoken for, shipping out tomorrow.

Target Sports AR-15 Carbine Length Quad Rail.

Same as this:

http://www.cdnninvestments.com/arhaqura16ne.html

Comes with rail covers (They look like the Ergo covers, but no name on them).

Always looking for: FDE Window PMags (30 rnd) or Basic FDE PMags (20 rnd).

[Necrodamus]

I have a Magpul AFG that I cant stand. Who wants to trade me something for it?

I'll take it...

I have

HKS 10-A speedloader
B-Square barrel mount bi-pod

I will have to look through my junk box, I have a ton of shi... treasures in there

[NonExistence]

To Give: I have a loaded AK47 mag with 30 rounds of 7.62 in it.

Would like: FDE rail covers, any front sling mount

Also, have some black MBUS and an AFG that I want to be FDE if anybody wants to trade

ETA: Magazine is accounted for.

[nimdabew]

I also have a MI rail mounted sling swivel if anyone needs it.

ETA: First item sent

[nimdabew]

PM sent on the AK magazine NonExistence.

[NonExistence]

PM sent on the AK magazine NonExistence.

Pming back on the sling swivel

[NonExistence]

Now up for grabs:

Remington 597 10 round magazine, gray factory synthetic stock.

C'mon guys keep this going, we all have some old stuff around somewhere that we don't need that somebody else might! If a noob like me can, anybody can!

[Skull_Hide]

Pm sent on Nimdabew cut carry handle.

I'll throw a chip on the table, up for grabs, nothing special.
A2 flash hinder
http://i731.photobucket.com/albums/ww31 ... AG0862.jpg" onclick="window.open(this.href);return false;

[jamoni]

Cut-down carry handle, mil-spec height. Unfinished, but the hard part is done. Looks like a LMT rear, but was cut down using a dremel. I never use it anymore.

Do you still have this sight? I need something similar.

Have:
1" 10-22 see through high rings
1" low weaver/picatinny rings
Bunch of 5.56 stripper clips.
12 gauge snap cap

Boxes of junk that I need to go look through.

[Gingerbread Man]

FAL SAW grip
Fobus Glock 19-23 holster ***Spoken for.
AR-15 Carbine handguards

I'll look through my box of junk

[Unassigned]

FAL SAW grip
Fobus Glock 19-23 holster
AR-15 Carbine handguards

I'll look through my box of junk

PM'd about Fobus holster.

[jeremy1391]

Have colt carbine carry handle rear sight

Want AK74/tantal/compatible mag

[nimdabew]

PM on carry handle.

[jeremy1391]

Also have .......

Ultimak gas tube rail for Yugoslav AK Spoken for

Millet 2.5X scout scope with leupold low rings

Still looking for AK74 mags :-/

[NonExistence]

Pm on the scope

[ultra magnus]

I've got ~600 .38 special brass, and maybe a hand full of 357 mag. A malfunctioning CMC 1911 mag. Not sure if it's the feed lips, or the spring, or follower but it causes malfunctions. If someone has calipers they could check the feed lips, or try replacing the spring, or use it for malfunction drills. I think I've still got a rail mount sling attachment that facilitates hooks or loops but I've Gotta go through the misc bag/bin to double check and to see what else I've got.

Interested in a holster for a S&W model 10/64, preferably with retention other than a snap, as it's hammer is bobbed. US made AK lower hand guard (preferably Kvar or something else with a heat shield)

[Treacle_Man]

Also have .......

Ultimak gas tube rail for Yugoslav AK

Millet 2.5X scout scope with leupold low rings

Still looking for AK74 mags :-/

PM on Ultimak

eta: DERP.

I have a regular charging handle and regular AR grip for grabs and some other stuff I'll look through later

[nimdabew]

I have updated how this thread is supposed to work.

First, do not post something unless you are willing to give something away for free. Shipping will be paid by the person that wants the item! Work this out amongst yourselves.

Second, do not say you will be willing to take something unless you put something else up in the thread. This prevents moochers and people taking things without contributing something to the community. People with things that they are willing to part with, make sure they put something in the thread before you send them something. Try to aim for at least a $25 value or items that cannot be purchased by themselves (like Magpul PMAG covers).

Third, trading is fine, but don't expect it for each item you give out. If you post something, just keep an eye out in the thread and try to snag stuff when it becomes available. I have sent things out to people with nothing in return because I don't need it, but the next person might. Try to emulate this.

Lastly, all items will be sent as is, with no express warranty or refunds or whatever. If an item is malfunctioning, say so. If it is not, then assume that it is in working order.

Thanks for helping maintain the community of sharing!

[Treacle_Man]

First, do not post something unless you are willing to give something away for free.

Question regarding this - does a person who is posting about wanting an item need to post something they are putting up for grabs at the same time? Or is it an "as available" kind of thing like the other Pay It Forward thread?

[Skull_Hide]

Pm sent for some of the .38 brass.

Going to dig through some boxes tonight and look for some stuff I don't use/need.