NTX Roll Call (pics and bios)

Forum section for northern Texas members

Moderator: ZSC 019 Officers

Re: NTX Roll Call (pics and bios)

Postby Scoop » Tue Mar 06, 2012 3:58 pm

Not if you charge a markup which you would to make a profit. You would still owe tax on the difference of your cost versus what you're charging for it. And if you're selling it by the glass (considered as you serving it) then that's a 14% tax rate which you have to pay and can't pass on to your customers.

And I wouldn't use the cuffs... I'll just sic my boys up here on you. One of which is a former marine drill sergeant. I love getting him to back me up because he's had people leaving the office in a dead run. Funny as hell!
Proving Murphy's Law is more than just a theory since 1981.
User avatar
Scoop
* *
 
Posts: 154
Joined: Mon Oct 31, 2011 10:20 pm
Location: Texas

Re: NTX Roll Call (pics and bios)

Postby dragon rouge » Tue Mar 06, 2012 4:58 pm

The make up to 200 gal a year law for personal use applies ONLY to beer and wine NOT SPIRITS.Making any amount of hard liquor is frowned upon in a major way by our overlords.
dragon rouge
* * *
 
Posts: 336
Joined: Sun May 25, 2008 8:47 am
Location: Fort Worth Texas

Re: NTX Roll Call (pics and bios)

Postby klrvagabond » Tue Mar 06, 2012 6:02 pm

Indeed; I think it was mentioned that even for fuel use and such there was a lot of paperwork and permitting required to make it legal.
klrvagabond
* * *
 
Posts: 515
Joined: Fri Mar 19, 2010 2:36 pm

Re: NTX Roll Call (pics and bios)

Postby 762Coyote » Tue Mar 06, 2012 6:16 pm

dragon rouge wrote:The make up to 200 gal a year law for personal use applies ONLY to beer and wine NOT SPIRITS.Making any amount of hard liquor is frowned upon in a major way by our overlords.


klrvagabond wrote:Indeed; I think it was mentioned that even for fuel use and such there was a lot of paperwork and permitting required to make it legal.


Thanks for the clarification
Image
762Coyote
* *
 
Posts: 210
Joined: Wed Mar 02, 2011 7:33 pm
Location: Proctor Texas

Re: NTX Roll Call (pics and bios)

Postby mrwolfen28 » Tue Mar 06, 2012 9:42 pm

Hello ZSC:019, My name is Ken. I'm a 41 year old male living in Dallas. My girlfriend and I have been reading your forums for awhile and I have been learning a lot. We believe in having preps and have been working on building up our supply. I have seen Zombie Squad on the TV on the History Channel and also saw you guys at the SciFy show in Irving. We are looking forward to meeting you guys and having some fun while learning more. Please feel free to ask any questions. Thanks, Ken
mrwolfen28
*
 
Posts: 60
Joined: Mon Mar 05, 2012 9:26 pm

Re: NTX Roll Call (pics and bios)

Postby 762Coyote » Tue Mar 06, 2012 10:12 pm

mrwolfen28 wrote:Hello ZSC:019, My name is Ken. I'm a 41 year old male living in Dallas. My girlfriend and I have been reading your forums for awhile and I have been learning a lot. We believe in having preps and have been working on building up our supply. I have seen Zombie Squad on the TV on the History Channel and also saw you guys at the SciFy show in Irving. We are looking forward to meeting you guys and having some fun while learning more. Please feel free to ask any questions. Thanks, Ken


Hi Ken! Welcome, to you and your wife.
Image
762Coyote
* *
 
Posts: 210
Joined: Wed Mar 02, 2011 7:33 pm
Location: Proctor Texas

Re: NTX Roll Call (pics and bios)

Postby GR1MSTONE » Tue Mar 06, 2012 10:23 pm

mrwolfen28 wrote:Hello ZSC:019, My name is Ken. I'm a 41 year old male living in Dallas. My girlfriend and I have been reading your forums for awhile and I have been learning a lot. We believe in having preps and have been working on building up our supply. I have seen Zombie Squad on the TV on the History Channel and also saw you guys at the SciFy show in Irving. We are looking forward to meeting you guys and having some fun while learning more. Please feel free to ask any questions. Thanks, Ken


yes welcome, maybe you could make it to the bugout and meet more of us... and blow stuff up :lol:
The world will know that free men stood against a tyrant, that few stood against many, and before this battle is over, that even a god-king can bleed.

MOLON LABE

http://www.blackoptex.com
User avatar
GR1MSTONE
* *
 
Posts: 261
Joined: Thu Sep 22, 2011 8:18 am
Location: NRH, Texas

Re: NTX Roll Call (pics and bios)

Postby Woody187 » Tue Mar 06, 2012 10:57 pm

Scoop wrote:Not if you charge a markup which you would to make a profit. You would still owe tax on the difference of your cost versus what you're charging for it. And if you're selling it by the glass (considered as you serving it) then that's a 14% tax rate which you have to pay and can't pass on to your customers.

And I wouldn't use the cuffs... I'll just sic my boys up here on you. One of which is a former marine drill sergeant. I love getting him to back me up because he's had people leaving the office in a dead run. Funny as hell!

Well if Im not making it to sell then Im good with Scoop is what Im reading. And I dont want you to use the cuffs because Im in trouble....wink wink. HAHAHA :twisted:
Building your dreams one paycheck at a time!

Image
User avatar
Woody187
* *
 
Posts: 224
Joined: Thu Jul 07, 2011 4:06 pm
Location: Burkburnett, TX

Re: NTX Roll Call (pics and bios)

Postby Woody187 » Tue Mar 06, 2012 10:59 pm

mrwolfen28 wrote:Hello ZSC:019, My name is Ken. I'm a 41 year old male living in Dallas. My girlfriend and I have been reading your forums for awhile and I have been learning a lot. We believe in having preps and have been working on building up our supply. I have seen Zombie Squad on the TV on the History Channel and also saw you guys at the SciFy show in Irving. We are looking forward to meeting you guys and having some fun while learning more. Please feel free to ask any questions. Thanks, Ken


Yip welcome!!!
Building your dreams one paycheck at a time!

Image
User avatar
Woody187
* *
 
Posts: 224
Joined: Thu Jul 07, 2011 4:06 pm
Location: Burkburnett, TX

Re: NTX Roll Call (pics and bios)

Postby Scoop » Wed Mar 07, 2012 12:13 am

YAY!! Welcome!
Proving Murphy's Law is more than just a theory since 1981.
User avatar
Scoop
* *
 
Posts: 154
Joined: Mon Oct 31, 2011 10:20 pm
Location: Texas

Re: NTX Roll Call (pics and bios)

Postby mrwolfen28 » Wed Mar 07, 2012 7:53 pm

Thanks for all the welcomes :)
mrwolfen28
*
 
Posts: 60
Joined: Mon Mar 05, 2012 9:26 pm

Re: NTX Roll Call (pics and bios)

Postby CFXJ » Sat Mar 10, 2012 12:39 pm

Hey everyone, My name is Dee, I am a PT and am an avid Zombie fan. I think that the mentality used to prep for Zombie outbreak can be transferred to so many
other things in life. Being prepared for emergencies or disasters is just being a good citizen using common sense to me. Might as well have some fun with it. I am right outside
of WF. In addition to the obvious, I enjoy martial arts, shooting, functional fitness and a good round of MW3. I would at some point like to be able to find a good, close place to wheel and
be able to stay for a few days.
CFXJ
 
Posts: 7
Joined: Fri Mar 09, 2012 2:27 am

Re: NTX Roll Call (pics and bios)

Postby Razor » Sat Mar 10, 2012 12:52 pm

Welcome to ZS dude, there are a good deal of us from WF that are very active here in ZS:19. I should be moving back up there shortly after my tour over here is up. I look forward to meeting you.
Absit invidia.
User avatar
Razor
ZS Member
ZS Member
 
Posts: 586
Joined: Thu Jun 14, 2007 11:48 am
Location: Merica!

Re: NTX Roll Call (pics and bios)

Postby GR1MSTONE » Sat Mar 10, 2012 2:27 pm

yes welcome!
The world will know that free men stood against a tyrant, that few stood against many, and before this battle is over, that even a god-king can bleed.

MOLON LABE

http://www.blackoptex.com
User avatar
GR1MSTONE
* *
 
Posts: 261
Joined: Thu Sep 22, 2011 8:18 am
Location: NRH, Texas

Re: NTX Roll Call (pics and bios)

Postby mrwolfen28 » Sat Mar 10, 2012 7:11 pm

welcome to ZS
mrwolfen28
*
 
Posts: 60
Joined: Mon Mar 05, 2012 9:26 pm

Re: NTX Roll Call (pics and bios)

Postby Woody187 » Sun Mar 11, 2012 9:05 am

Welcome from Burkburnett!!
Building your dreams one paycheck at a time!

Image
User avatar
Woody187
* *
 
Posts: 224
Joined: Thu Jul 07, 2011 4:06 pm
Location: Burkburnett, TX

Re: NTX Roll Call (pics and bios)

Postby Rugger » Sun Mar 11, 2012 12:40 pm

Welcome to the madness. :wink: It's a good group of people here.
*WARNING: The above post may contain sarcasm and/or sophisticated satire. Any psychological or emotional damage sustained by the reader is NOT the responsibility of the contributor.
Image Red Wire Rules!!
User avatar
Rugger
* * *
 
Posts: 661
Joined: Tue Apr 12, 2011 4:12 pm
Location: Texas

Re: NTX Roll Call (pics and bios)

Postby dragonfly_620 » Sun Mar 18, 2012 6:33 pm

Name: Jessica, Irish Hunters wife
Location: Arlington
Occupation: stay at home mom
Skills: not much except that I seem to be able to know how to fix a lot of stuff even if I know nothing about it.
Like to learn: as much as I can whenever I can
User avatar
dragonfly_620
 
Posts: 9
Joined: Sun Mar 18, 2012 11:15 am
Location: Arlington TX

Re: NTX Roll Call (pics and bios)

Postby 762Coyote » Sun Mar 18, 2012 6:40 pm

dragonfly_620 wrote:Name: Jessica, Irish Hunters wife
Location: Arlington
Occupation: stay at home mom
Skills: not much except that I seem to be able to know how to fix a lot of stuff even if I know nothing about it.
Like to learn: as much as I can whenever I can

Welcome to the site Jessica. It was nice to meet you yesterday
Image
762Coyote
* *
 
Posts: 210
Joined: Wed Mar 02, 2011 7:33 pm
Location: Proctor Texas

Re: NTX Roll Call (pics and bios)

Postby Woody187 » Sun Mar 18, 2012 7:46 pm

Welcome Jessica
Building your dreams one paycheck at a time!

Image
User avatar
Woody187
* *
 
Posts: 224
Joined: Thu Jul 07, 2011 4:06 pm
Location: Burkburnett, TX

Re: NTX Roll Call (pics and bios)

Postby mrwolfen28 » Sun Mar 18, 2012 8:07 pm

Welcome Jessica
mrwolfen28
*
 
Posts: 60
Joined: Mon Mar 05, 2012 9:26 pm

Re: NTX Roll Call (pics and bios)

Postby The Annoyed Man » Mon Mar 19, 2012 7:34 am

LimitBreaker600 wrote:
dragonfly_620 wrote:Name: Jessica, Irish Hunters wife
Location: Arlington
Occupation: stay at home mom
Skills: not much except that I seem to be able to know how to fix a lot of stuff even if I know nothing about it.
Like to learn: as much as I can whenever I can

Welcome to the site Jessica. It was nice to meet you yesterday

Ditto. By the way, my wife loves the dragonflies, and I can always score a few points with a piece of dragonfly jewelry.
User avatar
The Annoyed Man
 
Posts: 20
Joined: Sat Jan 07, 2012 11:53 am

Re: NTX Roll Call (pics and bios)

Postby Scoop » Mon Mar 19, 2012 8:57 am

Welcome aboard!
Proving Murphy's Law is more than just a theory since 1981.
User avatar
Scoop
* *
 
Posts: 154
Joined: Mon Oct 31, 2011 10:20 pm
Location: Texas

Re: NTX Roll Call (pics and bios)

Postby dragonfly_620 » Mon Mar 19, 2012 9:32 am

Thank you so much. I had a blast hanging out with the people who showed up Saturday and I look forward to meeting everyone.
User avatar
dragonfly_620
 
Posts: 9
Joined: Sun Mar 18, 2012 11:15 am
Location: Arlington TX

PreviousNext

Return to ZSC:019

Who is online

Users browsing this forum: No registered users and 2 guests