London Bridge MOLLE vest

Place for you to sell or trade your stuff with other ZS members. Please read the sticky about selling stuff before you post. Note that only paid members may post in Bartertown.

Moderator: ZS Global Moderators

London Bridge MOLLE vest

Postby GunsUp » Wed Feb 01, 2012 12:16 am

I also have a london bridge trading company LBT-6034B MOLLE vest. The vest opens in the front with a sturdy YKK zipper and is all MOLLE front and back. Sides adjust with "corset style" paracord draw stings so that it should fit anybody from medium on up to 5XL. The vest is made in the USA to LBT's usual high standards, The MSRP was $160, but it no longer seems to be available. It has never really been worn and is in mint condition. I'm looking for $50 shipped.
Image

I will only accept paypal.

Item Below is sold
I have three HSGI taco pouches that are the pistol+rifle mag type:
http://www.skdtac.com/HSGI-Double-Decke ... sg.312.htm

They are coyote brown. They are barely used, I put them on a rig, practiced a few dozen mag pulls and insertions and decided I don't care for them because I don't want anything in front of my rifle mags. The only indication that they are not brand new is the marks left on the malice clips where I used needle nose pliers to pull them through the molle. They sell for $42.00 ea at skdtac. I'm asking $30 each. I will include free shipping if you buy all 3, otherwise you pay $5 shipping.

There is a good review for the single stack version of this mag pouch here:
viewtopic.php?f=34&t=58286
http://farm8.staticflickr.com/7164/6799 ... 374d_b.jpg
Last edited by GunsUp on Wed Feb 22, 2012 8:02 pm, edited 2 times in total.
User avatar
GunsUp
ZS Member
ZS Member
 
Posts: 823
Joined: Wed Feb 04, 2009 12:44 am
Location: TX

Re: HSGI Coyote Brown Taco Pouches + LBT MOLLE vest

Postby Unassigned » Wed Feb 01, 2012 1:29 am

Dibs on all 3 Taco pouches. PM sent.
I am AR/Glock AND 1911*gasp!*/Blue Wire/Pie/Coke/Ford/Chuck Norris
Jeriah wrote:And for the record, I once had a GREAT time at a gay bar in New York.

Image
ZSC:029 - North East Ohio Zombie Squad - Founding Member, Chapter Officer.
User avatar
Unassigned
ZS Member
ZS Member
 
Posts: 989
Joined: Sun Oct 18, 2009 12:58 pm
Location: NE Ohio

Re: HSGI Coyote Brown Taco Pouches + LBT MOLLE vest

Postby GunsUp » Wed Feb 01, 2012 8:37 am

Pouches sold pending funds.
User avatar
GunsUp
ZS Member
ZS Member
 
Posts: 823
Joined: Wed Feb 04, 2009 12:44 am
Location: TX

Re: HSGI Coyote Brown Taco Pouches + LBT MOLLE vest

Postby Unassigned » Fri Feb 03, 2012 8:11 pm

GunsUp wrote:Pouches sold pending funds.


Payment sent.
I am AR/Glock AND 1911*gasp!*/Blue Wire/Pie/Coke/Ford/Chuck Norris
Jeriah wrote:And for the record, I once had a GREAT time at a gay bar in New York.

Image
ZSC:029 - North East Ohio Zombie Squad - Founding Member, Chapter Officer.
User avatar
Unassigned
ZS Member
ZS Member
 
Posts: 989
Joined: Sun Oct 18, 2009 12:58 pm
Location: NE Ohio

Re: London Bridge MOLLE vest

Postby GunsUp » Sat Feb 04, 2012 12:45 am

answered a PM about why I don't like the vest. Copying here for others.

It adjusts to all sizes quite well... I wear a 2XL shirt and when I put this on there is plenty of room to go up or down several sizes. I don't like it because it doesn't breath well... and being that I'm fat and live in the desert, I need breathable. I'd say it's really better geared towards making a "bug out vest" rather than battle rattle because there is just so much MOLLE, and I just don't have a use for that particular piece of gear. For battle rattle I'd prefer a USGI FLC or a small chest rig because of the open back.

I'm asking so much for it, because I'm not really sure I want to let it go... it's a good piece of gear and I keep hoping to find a real use for it... but I have too much crap, and I have to get rid of some shit before I end up on that hoarders tv show.

If you want more pics just tell me what you want to see, (I can model it if needed)
User avatar
GunsUp
ZS Member
ZS Member
 
Posts: 823
Joined: Wed Feb 04, 2009 12:44 am
Location: TX

Re: London Bridge MOLLE vest

Postby Hachiman » Sat Feb 04, 2012 6:40 am

Bump for a good deal
Last edited by Hachiman on Sat Feb 04, 2012 3:28 pm, edited 1 time in total.
~Hachi~

ZS Fleet Number ZS-0140

brothaman wrote: you seem to like the abuse so I figured I'd jump in for a kick or 2.


ZSC:014 Texas Gulf Coast Chapter of Zombie Squad

Image
User avatar
Hachiman
* * * * *
 
Posts: 1877
Joined: Thu Jul 24, 2008 12:09 am
Location: Houston

Re: London Bridge MOLLE vest

Postby GunsUp » Sat Feb 04, 2012 10:13 am

It adjusts with the two cord locks on the paracord sides and a velcro strap on each shoulder to adjust ride height.

The first three are adjusted all the way out, I measure 48" around my stomach, with the pillow added it becomes a 59" chest and a 62" stomach. I'm 5'11" for reference.
Image
Image
Image

Adjusted all the way in, it's about a foot from closing... which i guess makes it fit a 35" torso... if you got rid of the lacing all-together, you could probably get it down to 32".
Image
User avatar
GunsUp
ZS Member
ZS Member
 
Posts: 823
Joined: Wed Feb 04, 2009 12:44 am
Location: TX

Re: London Bridge MOLLE vest

Postby Hachiman » Sat Feb 04, 2012 3:28 pm

bump
~Hachi~

ZS Fleet Number ZS-0140

brothaman wrote: you seem to like the abuse so I figured I'd jump in for a kick or 2.


ZSC:014 Texas Gulf Coast Chapter of Zombie Squad

Image
User avatar
Hachiman
* * * * *
 
Posts: 1877
Joined: Thu Jul 24, 2008 12:09 am
Location: Houston

Re: London Bridge MOLLE vest

Postby GunsUp » Wed Feb 22, 2012 8:01 pm

bump lowered price.
User avatar
GunsUp
ZS Member
ZS Member
 
Posts: 823
Joined: Wed Feb 04, 2009 12:44 am
Location: TX

Re: London Bridge MOLLE vest

Postby GunsUp » Thu Feb 23, 2012 12:10 am

sold pending funds.
User avatar
GunsUp
ZS Member
ZS Member
 
Posts: 823
Joined: Wed Feb 04, 2009 12:44 am
Location: TX


Return to Bartertown

Who is online

Users browsing this forum: No registered users and 3 guests